Optional Answering System Settings - Sharp UX-D50 User Manual

all.book Page 69 Monday, September 1, 2003 3:46 PM

Optional Answering System Settings

Setting ICM time
Incoming messages (ICMs) are the messages which callers leave for you on
the built-in answering system. The answering system is set at the factory to
allow each caller a maximum of 4 minutes to leave a message. If desired, you
can change this setting to 15, 30, or 60 seconds.
1
FUNKTION
Press
2
Press once and
3
Press .
4
Press a number from 1 to 4 to select the desired ICM recording time.
1
15 seconds
30 seconds
2
5 STOP
Press
FAX mode on A.M. failure
If the memory for recording incoming messages becomes full while you are
out, the answering system will no longer be able to record messages. The ON
A.M. FAILURE setting is used to choose the response of the machine to
incoming calls when this happens:
♦
YES (switch to FAX mode): The reception mode will switch to FAX mode,
allowing the machine to continue to receive faxes automatically. With this
setting, you can still use the remote commands to listen to your messages
and then erase them (see Remote Operations on page 75).
Optional Answering System Settings
once and once.
once.
3
60 seconds
4
4 minutes
The display briefly shows
your selection, then:
to return to the date and time display.
Display:
A.M. SETTING
RECORDING TIME
REMOTE CODE
69