Loading The Document - Sharp UX-D50 User Manual

Telefax
Hide thumbs Also See for UX-D50:
Table of Contents

Advertisement

all.book Page 83 Monday, September 1, 2003 3:46 PM
Other restrictions
The scanner cannot recognise yellow, greenish yellow, or light blue ink.
Ink, glue, and correcting fluid on documents must be dry before they pass
through the document feeder.
All clips, staples, and pins must be removed from documents before loading
in the feeder. If these are not removed, they may damage the machine.
Documents which are patched, taped, torn, smaller than the minimum size,
carbon backed, easily smudged, or have a slippery coated surface should
be photocopied, and the copy loaded in the feeder.

Loading the Document

Up to 10 pages can be placed in the feeder at one time. The pages will
automatically feed into the machine starting from the bottom page.
If you need to send or copy more than 10 pages, place the additional pages
gently and carefully in the feeder just before the last page is scanned. Do
not try to force them in, as this may cause double-feeding or jamming.
If your document consists of several large or thick pages which must be
loaded one at a time, insert each page into the feeder as the previous page
is being scanned. Insert gently to prevent double-feeding.
1
Adjust the document guides to the
width of your document.
2
Insert the document face down in the
document feeder. The top edge of the
document should enter the feeder first.
READY TO SEND will appear in the
display.
Loading the Document
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents