Listening To Received Messages - Sharp UX-D50 User Manual

all.book Page 67 Monday, September 1, 2003 3:46 PM

Listening to received messages

When you return, the display will show the number of messages recorded.
Follow the steps below to listen to your messages.
1
WIEDERG./
Press
HALTEN
•
If you only want to listen to new messages (messages not previously
listened to), continue to hold
2
The messages will play.
•
As each message plays, the date and time of recording will appear briefly in
the display. If no messages were received, NO MESSAGES will appear.
•
Repeat: To listen to a message a second time, press
playback of that message ends. To move back to the previous message,
press
ZURÜCK
•
Skip: To skip forward to the next message, press
Note: Playback will stop if you receive a call, lift the handset, or press
♦
You can print out a list of your received messages that shows the date and
time that each was received. See page 116.
Operating the Answering System
.
WIEDERG./
HALTEN
within 3 seconds of the beginning of the current message.
down for at least two seconds.
before
ZURÜCK
0
.
VOR
STOP
.
67