Erasing Received Messages; Recording Memos - Sharp UX-D50 User Manual

all.book Page 68 Monday, September 1, 2003 3:46 PM
Operating the Answering System

Erasing received messages

It is important to erase received messages after you listen to them to ensure
that the memory does not become full.
♦
Erasing all messages: To erase all messages, press
START/SPEICHER
and then
♦
Erasing a single message: To erase a single message, press
while the message is being played.

Recording memos

You can record memos for yourself and other users of the machine. These will
be played back together with incoming messages when the
pressed.
1
Press
AUFN.
2
Pick up the handset, press
3
When you have finished speaking, replace the handset or press
Recording phone conversations (2-way recording)
To record a phone conversation, hold down the
conversation you wish to record. When you are finished, release the key. The
conversation will be played back when the
Note: Intercom conversations cannot be recorded.
68
.
once and once.
START/SPEICHER
FUNKTION
,
WIEDERG./
HALTEN
, and speak into the handset.
key during the
AUFN.
WIEDERG./
key is pressed.
HALTEN
,
LÖSCHEN
LÖSCHEN
key is
STOP
.