Sharp UX-D50 User Manual page 15

all.book Page 13 Monday, September 1, 2003 3:46 PM
key
4
Press this key to end a call. To turn off the power of the cordless handset,
hold down this key until the display goes blank.
key
5
Use this key to clear an entry, or to move back to the previous level in the
settings. Press this key during a call to put the other party on hold.
Number keys
6
Use these keys to dial numbers, and enter numbers and letters when storing
auto-dial numbers.
0 key
7
When entering an auto-dial number, hold this key down until a hyphen
appears to insert a pause between digits.
key
8
Use this key to search for an auto dial number (press
press key and
hear a fax tone when you answer a call, press this key to begin fax reception.
key
9
Press this key to make or answer a call. To turn on the power of the cordless
handset when it is off, hold down this key until the display turns on .
key
10 10
Press this to select settings and complete entries when programming
information in the cordless handset.
Battery cover
11 11
Remove this cover to install or replace the handset battery.
key to scroll through your auto-dial numbers). If you
key and then
13