Sharp UX-D50 User Manual page 72

all.book Page 70 Monday, September 1, 2003 3:46 PM
Optional Answering System Settings
♦
NO (do not switch to FAX mode): The machine will answer after 20 rings,
after which it will wait to receive a remote command. Most callers will hang
up before it answers; however, when you call the machine from a remote
location, you can wait until it answers, listen to your messages, and then
erase them (see Remote Operations on page 75).
The initial setting is NO . If you want to change the setting to YES, press the
panel keys as follows:
1
FUNKTION
Press
2
Press once and
3
Press .
4
Press to select YES (switch to
1
FAX mode), or
5 STOP
Press
OGM only mode
If needed, you can turn off recording of incoming messages. In this case, your
outgoing message will play, but callers will not be able to leave a message.
(The machine will still receive faxes sent by automatic dialling.)
1
FUNKTION
Press
2
Press once and
70
once and once.
twice.
to select NO.
2
to return to the date and time display.
once and once.
once.
Display:
A.M. SETTING
ON A.M. FAILURE
1=YES, 2=NO
The display briefly shows
your selection, then:
OGM ONLY MODE
Display:
A.M. SETTING
OGM ONLY MODE