Sharp UX-D50 User Manual page 140

all.book Page 138 Monday, September 1, 2003 3:46 PM
Quick Reference Guide
Using the Cordless Phone
Making a phone call
1. Pick up the cordless handset and press
.
2. When you hear the dial tone, dial the
number.
3. When you are ready to end the call,
press .
Making a phone call using automatic
dialling
1. Press once.
2.Press or
wish to dial appears in the display.
3. Press .
Receiving a phone call
1. When the cordless handset rings, pick it
up and press
2. When you are ready to end the call,
press .
Receiving a fax using the cordless
handset
If you hear a fax tone after answering a
call on the cordless handset, or if the
other party speaks to you and then
wants to send a fax, press
138
until the number you
.
.
Storing auto dial numbers
1. Press and then press
Enter a name for the auto-dial
2.
number. To enter each letter, hold
down the key for the letter as shown in
the chart below until the letter appears
in the display.
SPACE = M, N, O =
A, B, C = P, Q, R, S =
D, E, F = T, U, V =
W, X, Y, Z =
G, H, I =
J, K, L =
3. Press .
4. Enter the full fax/phone number.
To clear a mistake, press
To insert a pause, hold down
"xx" appears
.
5. Press and then
exit
.
Listening to messages
1. Press and then press
2. Press to listen to all your
messages, or to listen to only your
new messages.
3. While listening, you can do the following:
Repeat a message: Press
Skip a message: Press
Delete a message: Press
message is playing.
Stop playback: Press
4 When finished, press
exit.
twice.
.
until
repeatedly to
.
.
.
while the
.
repeatedly to