Optional Answering Machine Settings - Sharp UX-BS60 Operation Manual

Optional Answering Machine Settings

Setting ICM time
Incoming messages (ICMs) are the messages which callers leave for you on
the built-in answering machine. The answering machine is set at the factory to
allow each caller a maximum of 4 minutes to leave a message. If desired, you
can change this setting to 15, 30, or 60 seconds.
1
Press once and
2
Press once and
3
Press .
4
Press a number from 1 to 4 to select the desired ICM recording time
.
15 seconds
30 seconds
5
Press to return to the date and time display.
FAX mode on A.M. failure
If the memory for recording incoming messages becomes full while you are
out, the answering machine will no longer be able to record messages. The
ON A.M. FAILURE setting is used to choose the response of the machine to
incoming calls when this happens:
♦
YES (switch to FAX mode): The reception mode will switch to FAX mode,
allowing the machine to continue to receive faxes automatically. With this
setting, you can still use the remote commands to listen to your messages
and then erase them (see Remote Operations on page 60).
Optional Answering Machine Settings
Display:
once.
once.
60 seconds
4 minutes
The display briefly shows
your selection, then:
A.M. SETTING
RECORDING TIME
RECORDING TIME
1=15 SECONDS
REMOTE CODE
53