Using The Answering System; Recording An Outgoing Message - Sharp UX-D50 User Manual

all.book Page 64 Monday, September 1, 2003 3:46 PM

3. Using the Answering System

The built-in answering system allows you to receive both voice messages and
faxes while you are out.
♦
To use the answering system, you will first need to record an outgoing
message. When you go out, turn on the answering system by setting the
reception mode to A.M.

Recording an Outgoing Message

The outgoing message (OGM) is the greeting that the machine plays after
answering a call to inform callers that they can leave a message or send a fax.
Follow the steps below to record a message.
Example:
"Hello. You've reached ______ . No one is available to take your call right now.
Please leave a message after the beep or press your facsimile Start key to
send a fax. Thank you for calling."
1
Press
AUFN.
2
Press once.
3
Lift the handset.
(If you have already recorded a
message, you can press
listen to the message.)
64
once and once.
WIEDERG./
to
HALTEN
Display:
OGM1(GENERAL)
LIFT HANDSET OR
PLAY: PLAYBACK