Remote Operations; Remote Code Number - Sharp UX-D50 User Manual

all.book Page 75 Monday, September 1, 2003 3:46 PM

Remote Operations

When you are out, you can call the machine from any tone dial telephone and
play back your messages using the remote commands. You can also use
these commands to change the reception mode and other settings.

Remote code number

To access the machine to perform remote operations, you must first enter your
remote code number. The remote code number has been set to "001" at the
factory. If you wish to use a different number, follow these steps:
1
FUNKTION
Press
2
Press once and
3
Press .
4
Press the number keys to enter a 3-digit remote code number.
START/SPEICHER
5
Press
to the date and time display.
Toll Saver
When you call the machine to listen to your messages, it will answer after two
rings if it has received at least one message, or after four rings if it has not
received any messages.
This allows you to save money on telephone charges, particularly if you are
calling long distance. If the machine does not answer after the second ring,
you can simply hang up before it answers, saving yourself the cost of that call.
once and once.
twice.
to store the remote number, and then
Remote Operations
Display:
A.M. SETTING
REMOTE CODE
STOP
to return
75