Sharp UX-D50 User Manual page 42

all.book Page 40 Monday, September 1, 2003 3:46 PM
Storing and Using Auto-Dial Numbers
3
Press .
4
Enter a name for the auto-dial number. To enter each letter, hold down
the key for the letter as shown in the chart below until the letter appears
in the display. Up to 8 characters can be entered. (If you do not wish to
enter a name, go directly to Step 5.)
To clear a mistake, press
5
Press .
6
Enter the number by pressing the number keys. Up to 24 digits can be
entered. (Note: A space cannot be entered.)
•
To clear a mistake, press
•
If a pause is needed between any of the digits to access an outside line or
a special service, hold down
be entered in a row.
7
Press .
8
Return to Step 2 to store another number, or press
exit.
40
SPACE = M, N, O =
A, B, C = P, Q, R, S =
T, U, V =
D, E, F =
G, H, I = W, X, Y, Z =
J, K, L =
. To clear all the entered letters, hold down
. To clear all the entered numbers, hold down
until "xx"
NAME?
NUMBER?
appears. Several pauses can
DONE
repeatedly to
.
.