Sharp UX-D50 User Manual page 12

all.book Page 10 Monday, September 1, 2003 3:46 PM
UP and DOWN arrow keys
7
Enlarge/reduce setting: When making a copy of a document, press these
keys to select an enlarge/reduce setting (page 106).
Volume setting: When a document is not in the feeder, press these keys to
change the speaker volume when the
ringer volume at any other time (page 33).
FUNCTION key settings: Press these keys after pressing the FUNCTION
key to scroll through the FUNCTION MODE settings.
Number keys
8
Use these keys to dial numbers, and enter numbers and letters when storing
auto-dial numbers.
9 Panel release
Press this release to open the operation panel.
STOP key
10 10
Press this key to cancel an operation before it is completed.
COPY/HELP/POLL key
11 11
Press this key to make a copy of a document (page 106). Press this key to
print out the Help List, a quick reference guide to the operation of the fax
machine. This key is also used after dialling to poll (request fax transmission
from) another machine (page 114).
12 12
START/MEMORY key
Press this key after dialling to begin fax transmission (page 86). Press this key
before dialling to send a fax through memory (page 96).
13 13
INTERCOM key
Press this key to page or locate the cordless handset.
Left and right arrow keys
14 14
Auto-dial numbers: When sending a fax or making a phone call, press these
keys to scroll through your auto-dial numbers (page 91), the "REVIEW
CALLS" list (only available if you have Caller ID; page 110), and the last
number dialled (redial; page 93).
FUNCTION key settings: Press the right arrow key after scrolling with the up
and down arrow keys to select a FUNCTION key setting.
10
key has been pressed, or the