Sharp UX-D50 User Manual page 56

all.book Page 54 Monday, September 1, 2003 3:46 PM
Other Features
3
Press once. The duration appears.
4
Press repeatedly to exit.
End call setting
When this setting is turned on, calls can be ended by simply replacing the
handset in the charger (there is no need to press
if it has been placed on hold.)
1
Press 3 times.
2
Press once.
3
Press once.
4
Press or
and then press
5
Press repeatedly to exit.
Turning the cordless handset power on and off
To conserve battery power, you can turn the cordless handset off. To turn off
the power, hold down
hold down
automatically when the cordless handset is placed in the charger.
54
to select ON or OFF
.
until the display goes blank. To turn the power on,
until the display turns on. The power also turns on
). (A call will end even
Cordless handset display:
4 SET
41 END CALL
DONE