Sharp UX-68 Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Fax Machine
  5. UX-68
  6. Service manual
Sharp UX-68 Service Manual

Sharp UX-68 Service Manual

Hide thumbs Also See for UX-68:
Table of Contents

Advertisement

Quick Links

Illustration: UX-68
This service manual is omitted because it is partly common to UX-40DE of the service manual of the previous
issue. Those common parts are to refer to the service manual of UX-40DE (00ZUX40DE/SME).
[1] Specifications ............................................ 1-1
[2] Operation panel ......................................... 1-2
[3] Refer to the service manual of UX-40DE.
[4] Refer to the service manual of UX-40DE.
[5] Quick reference guide ............................... 1-8
[1] Adjustments ............................................... 2-1
[3] Troubleshooting ...................................... 2-19
[4] Error code table ....................................... 2-20
CHAPTER 3. MECHANISM BLOCKS
[1] Refer to the service manual of UX-40DE.
[2] Refer to the service manual of UX-40DE.
[1] Block diagram ............................................4-1
[2] Wiring diagram .......................................... 4-2
[3] Point-to-point diagram ............................... 4-3
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for
maintaining the safety and performance of the set.
SERVICE MANUAL
CONTENTS
SHARP CORPORATION
No. 00ZUX68DE/SME
FACSIMILE
MODEL
[1] Circuit description ...................................... 5-1
power supply PWB ............................5-12
[5] Circuit description of CIS unit ...................5-12
CHAPTER 6. CIRCUIT SCHEMATICS AND
PARTS LAYOUT
[1] Control PWB circuit ................................... 6-1
[2] TEL/LIU PWB circuit ................................. 6-9
[3] Power supply PWB circuit ...................... 6-13
[4] Operation panel PWB circuit ................... 6-15
CHAPTER 7. OPERATION FLOWCHART
[1] Refer to the service manual of UX-40DE.
[2] Refer to the service manual of UX-40DE.
CHAPTER 8. OTHERS
[1] Refer to the service manual of UX-40DE.
[2] Refer to the service manual of UX-40DE.
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
UX-68DE
FO-78DE
UX-68
FO-78

Advertisement

Table of Contents
loading

Related Manuals for Sharp UX-68

Summary of Contents for Sharp UX-68

  • Page 1: Table Of Contents

    FACSIMILE UX-68 FO-78 MODEL Illustration: UX-68 This service manual is omitted because it is partly common to UX-40DE of the service manual of the previous issue. Those common parts are to refer to the service manual of UX-40DE (00ZUX40DE/SME). CONTENTS CHAPTER 1.
  • Page 2 UX-68DE FO-78DE CAUTION FOR BATTERY REPLACEMENT (Danish) ADVARSEL ! Lithiumbatteri-Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandoren. (English) Caution ! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer.

  • Page 3: Chapter 1. General Description

    Length: 140 to 600 mm As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for procduct improvement without prior notice. The performance specifications figures indicated are nominal values of production units. There may be some deviation from these values in individual units.

  • Page 4: Operation Panel

    UX-68DE FO-78DE [2] Operation panel TEL/FAX ANRUFB. AUFN. ZURÜCK WIEDERG./VOR KURZWAHL LÖSCHEN LAUTSTÄRKE WAHLWDH. ABRUF STOP PQRS WXYZ FUNKTION ALPHAWAHL AUFLÖSUNG/ KOPIE/ SYMBOLE EMPFANGSART START/ LAUTSPR. HILFE SPEICHER 16 17 18 11. WAHLWDH. (REDIAL key) 1. Zielwahltasten (Rapid Dial keys) Press this key to automatically redial the last number Press one of these keys to dial a fax number automatically.

  • Page 5: Quick Reference Guide

    UX-68DE FO-78DE SENDING FAXES [5] Quick reference guide ENTERING YOUR NAME AND NUMBER Place your document (up to 5 pages) FUNKTION 1. Press: face down in the document feeder. Display shows: OWN NUMBER SET START/ SPEICHER 2. Press: 3. Enter your fax number (max. of 20 digits) by pressing the number keys. •...
  • Page 6 UX-68DE FO-78DE M E M O 1 – 9...

  • Page 7: Chapter 2. Adjustments

    UX-68DE FO-78DE CHAPTER 2. ADJUSTMENTS 2. IC protectors replacement ICPs (IC Protectors) are installed to protect the motor driver circuit. ICPs protect various ICs and electronic circuits from an overcurrent con- [1] Adjustments dition. The location of ICPs are shown below: General Since the following adjustments and settings are provided for this model, make adjustments and/or setup as necessary.

  • Page 8: Diagnostics And Service Soft Switch

    UX-68DE FO-78DE [2] Diagnostics and service soft switch 1. Operating procedure (1) Entering the diagnostic mode Press FUNC → 9 → → 8 → # → 7 , and the following display will appear. ROM Ver. FPB0 After 2 sec: DIAG MODE FPB0 Then press the START key and country name selected by country select will appear.
  • Page 9 UX-68DE FO-78DE 3. Diagnostic items description 3. 6. Signal send mode 3. 1. Soft switch mode This mode is used to send various signals to the circuit during FAX com- munication. Every push of START key sends a signal in the following The soft switches are provided so that each operation mode can be set sequence.
  • Page 10 UX-68DE FO-78DE 3. 11. Message print 3. 14. Country select Used to print the displayed message of communication for translate each This mode is used to set line connecting parameters which correspond language. to each destination. When the country select mode is selected, and then the START key is 3.
  • Page 11 UX-68DE FO-78DE 5. Soft switch description • Soft switch Switch setting and function DATA Initial ITEM Remarks setting Protect from echo Forced 4800bps reception Footer Print Length limitation of copy/send/receive No limit Copy/Send:60cm Receive:1.5m CSI transmission Not transmitted Transmitted DIS receive acknowledgement during G3 Twice NSF:Once transmission...
  • Page 12 Disconnect the line when DIS is received in RX mode No Equalizer freeze control(MODEM) Equalizer freeze control 7200 bps only CNG transmission in manual TX mode Initial compression scheme for sharp fax in TX mode MR mode H2 mode Modem speed automatic down when RX level is under -40dBm...
  • Page 13 UX-68DE FO-78DE Initial Switch setting and function DATA ITEM Remarks setting Auto dial mode Delay timer of after line 1.7s 2.0s 2.5s 3.0s 3.6s 4.0s 5.5s 7.0s connect No. 1 No. 2 No. 3 Fax signal detection after telephone mode dial Recalling fixed only one time when dialing was unsuccessful without detecting busy tone signal Reserved...
  • Page 14 UX-68DE FO-78DE Switch setting and function Initial DATA ITEM Remarks setting Reserved Reserved Reserved Reserved Reserved Caller ID function OPTION Reserved Reserved CI off detection timer Binary input (0~1550ms setting by 50ms step) No. = 16 8 4 2 1 2 3 4 5 1 1 1 0 Reserved...
  • Page 15 UX-68DE FO-78DE Switch setting and function Initial DATA ITEM Remarks setting DTMF detection time 50ms 80ms 100ms 120ms No. 1 No. 2 Protection of remote reception(5 detection Remote reception with GE telephone Compatible Not compatible Remote operation code figure by external Binary input OPTION TEL (0~9)
  • Page 16 UX-68DE FO-78DE Switch setting and function Initial DATA ITEM Remarks setting Busy tone continuous sound detect time 5sec 10sec Busy tone detect continuation sound detect during OGM Busy tone detect continuation sound detect Busy tone detect intermittent sound detect during OGM Busy tone detect intermittent sound detect Busy tone detection pulse number 2pulses...
  • Page 17 UX-68DE FO-78DE Switch setting and function Initial DATA ITEM Remarks setting AGC Maximum Gain (line) 10~25dB (1dB step) Binary input No. = AGC Maximum Gain (mic) 10~25dB (1dB step) Binary input No. = AGC Eref access code (line) -0~-30dB (2dB step) Binary input No.
  • Page 18 UX-68DE FO-78DE Switch setting and function Initial DATA ITEM Remarks setting Sender’s phone number setting Cannot change Change allowed Summer time Ringer volume Middle High OPTION No. 3 No. 4 Reserved Reserved Polling key OPTION Reserved Reserved Reserved Speaker volume Very Low Middle High...
  • Page 19 UX-68DE FO-78DE SW-A3 No. 1, No. 2 CED tone signal interval • Soft switch function description For international communication, the 2100Hz CED tone may act as an SW-A1 No. 1 Protect from echo echo suppression switch, causing a communication problem. Though SW-A3 No.
  • Page 20 Option settings mode. SW-A6 No. 7 Initial compression scheme for sharp fax in TX mode When set to "0", if the other fax is Sharp model, fax transmit the docu- SW-B4 No. 1 Dialing pause (sec/pause) ment by H2 mode.
  • Page 21 UX-68DE FO-78DE SW-B5 No. 1 ~ No. 3 Auto dial mode Delay timer of after line con- SW-C1 No. 5 Line density selection nect Used to set the transmission mode which is automatically selected when Delay time between the line connection and dial data output under the the Resolution key is not pressed.
  • Page 22 UX-68DE FO-78DE SW-D3 No. 1 ~ No. 5 CI off detection timer SW-E3 No. 2, No. 3 Action select when DTMF "#" is received during (0~1550ms setting by 50ms step) phone/fax automatic switching mode Set the minimum time period of CI signal interruption which affords to be SW-E3 No.
  • Page 23 UX-68DE FO-78DE SW-H1 No. 2 Busy tone detect continuation sound detect during SW-I3 No. 5 FAX reception in case of detecting no sound detect after ICM recording Used to detect the continuous tone of specific frequency during OGM If this switch is set to "0", machine doesn’t change to FAX reception output.
  • Page 24 UX-68DE FO-78DE SW-K1 No. 1 Entering diag mode by pressing SPEED key SW-I7 No. 5 ~ No. 8 Reserved A bit which is used in the production process only. When the SPEED key Set to "0". is pressed, the switch is changed from the stand-by state to the diag SW-I8 No.

  • Page 25: Troubleshooting

    UX-68DE FO-78DE [3] Troubleshooting Refer to the following actions to troubleshoot any of the problems men- • Apply line equalization SOFT SWITCH A5-1, 2. tioned in 1-4. May be used in case [1] [2] [3] [4]. [1] A communication error occurs. •...

  • Page 26: Error Code Table

    UX-68DE FO-78DE [4] Error code table 1. Communication error code table G3 Transmission Code Final received signal Error Condition (Receiver side) Incomplete signal frame Cannot recognize bit stream after flag NSF, DIS Cannot recognize DCS signal by echo etc. Cannot recognize NSS signal (FIF code etc) Disconnects line during reception (carrier missing etc) Disconnects line by fall back Disconnects line during reception of multi page...
  • Page 27 UX-68DE FO-78DE M E M O 2 – 21...

  • Page 28: Chapter 4. Diagrams [1] Block Diagram

    UX-68DE FO-78DE CHAPTER 4. DIAGRAMS [1] Block diagram 4 – 1...

  • Page 29: Wiring Diagram

    UX-68DE FO-78DE [2] Wiring diagram CNPN 4 – 2...

  • Page 30: Point-To-Point Diagram

    UX-68DE FO-78DE [3] Point- to-point diagram CNMT CNLIUA CNLIUA TPAD TPAD TELOUT TELOUT TELIN TELIN TPBD TPBD TELMUTE TELMUTE TPAD TPAD TX/RX TPBD TPBD MOTOR TEL/LIU RXIN RXIN TXOUT TXOUT CNTH STRB1 STRB1 +24V +24V STRB2 STRB2 CNLIUB CNLIUB N.C. RANK RLYCNT RLYCNT...

  • Page 31: Chapter 5. Circuit Description

    UX-68DE FO-78DE CHAPTER 5. CIRCUIT DESCRIPTION 3. Operational description Operational descriptions are given below: • [1] Circuit description Transmission operation When a document is loaded in standby mode, the state of the docu- ment sensor is sensed via the 1 chip fax engine (FC200). If the sen- 1.

  • Page 32: Circuit Description Of Control Pwb

    UX-68DE FO-78DE 3) 27C2000 (IC10): pin-32 DIP (ROM) [2] Circuit description of control PWB ROM of 2 Mbit equipped with software for the main CPU. 1. General description 4) W24258S-70LE (IC6): pin-28 SOP (SRAM) Line memory for the main CPU system RAM area and coding/decoding Fig.
  • Page 33 UX-68DE FO-78DE FC200 (IC3) Terminal descriptions Input Output Pin Description Pin Name Pin No. Type Type (Note: Active low signals have an "n" pin name ending.) CPU Control Interface − MIRQn Modem interrupt, active low. (Hysteresis In, Internal Pullup.) − SYSCLK System clock.
  • Page 34 UX-68DE FO-78DE FC200 (IC3) Terminal descriptions Input Output Pin Name Pin No. Pin Description Type Type Operator Panel Interface OPI[2]/GPIO[23]/ (Pullup, Hysteresis In) Keyboard return [2] or GPIO[23] or SSCLK1 SSCLK1 (for SSIF1) OPI[3]/GPIO[24] (Pullup, Hysteresis In) Keyboard return [3] or GPIO[24] −...
  • Page 35 UX-68DE FO-78DE (2) Panel control block The following controls are performed by the FC200. • Operation panel key scanning • Operation panel LCD display (3) Mechanism/recording control block • Recording control block diagram (1) OPO[7:0]* TEST OPERATOR OPI[3:0]* BATRSTN PANEL, PANEL/LCD PWB LEDCTL* RESETN...
  • Page 36 UX-68DE FO-78DE FEATURES (4) Modem (FM209V) block • Group 3 facsimile transmission/reception INTRODUCTION ITU-T V.29, V.27 ter, T.30, V.21 Channel 2, T.4 The CONEXANT FM209V MONOFAX modem is a synchronous 9600 bits per second (bps) half-duplex modem with error detection and DTMF ITU-T V.17 and V.27 ter short train reception.
  • Page 37 UX-68DE FO-78DE FM209V (IC5) Hardware Interface Signals Pin Signals – 128-Pin TQFP Pin No. Signal Name I/O Type Pin Description SR4IN/RESERVED Modem Interconnect SR3OUT/RESERVED Modem Interconnect EYESYNC Eye Pattern Circuit EYECLK Eye Pattern Circuit DTE serial interface SR1IO Modem Interconnect —...
  • Page 38 UX-68DE FO-78DE FM209V (IC5) Hardware Interface Signals Pin Signals – 128-Pin TQFP Pin No. Signal Name I/O Type Pin Description SPKRM P Speaker Interface Output AVDD P 5V Digital power for IA — No Connection ICLK P Modem Interconnect MCLK S/NC Modem Interconnect VDD2 3.3V Digital Supply for DSP...

  • Page 39: Circuit Description Of Tel/Liu Pwb

    UX-68DE FO-78DE [3] Circuit description of TEL/LIU PWB (1) TEL/LIU block operational description 1) Block diagram FAX MODEM FM209V SP OUT TEL/LIU PWB CONTROL PWB ENABLE RTLOOP (0:1) MIC ENABLE TXOUT SPKRP-P (1:0) (0:0) (1:1) DAC GAIN DRIVER TXMUTE 0,6dB DPON VOL_A GAIN...
  • Page 40 UX-68DE FO-78DE 5. Externally connected TEL OFF HOOK detection circuit section 4) Signal selection The following signals are used to control the transmission line of TEL/ • The circuit current detection is turned on together with OFF HOOK FAX signal. For details, refer to the signal selector matrix table. of main body or OFF HOOK of externally connected TEL.
  • Page 41 UX-68DE FO-78DE [Signals for status recognition according to input signals] Signal Name (CNLIUA) Signal Name (CNLIUA) Signal Name Function TELOUT RXIN TELIN TXOUT H:The handset is in the on-hook state. TELMUTE L: The handset is in the off-hook state. Incoming call (CI) detection signal [Other signals] +24V Signal Name...

  • Page 42: Circuit Description Of Power Supply Pwb

    UX-68DE FO-78DE [4] Circuit description of power supply PWB 1. Block diagram 1.6A/250V Noise Rectifying Filter AC IN Smoothing Switching Circuit Regulator Circuit Circuit Circuit (RCC system) 1.6A/250V +24V Control Circuit Photo Coupler Fig. 8 2-1. Noise filter circuit 2-4. Control circuit The input noise filter section is composed of L1, C1, C15 and C21 which This circuit controls output voltage of 24V by adjusting ON period of Q1, reduces normal mode noise from the AC line and common mode noise...
  • Page 43 UX-68DE FO-78DE CHAPTER 6. CIRCUIT SCHEMATICS AND PARTS LAYOUT VBAT 270 x 4 C175 2200P PWRDWN C177 XOUT 270 x 4 32.768kHz TSTCLK SYSCLK SYSCLK (3-2A) MIRQ R100 33K C176 (3-3B) MIRQ R108 33K +VREF RESET +VREF (5-2D) –VREF R107 33K DEBUG –VREF / CLREF (5-2D)
  • Page 44 UX-68DE FO-78DE 6 – 2...
  • Page 45 UX-68DE FO-78DE XTLI VAA-P(+5VIAA) N.C./SOUT-S AGND5 SR3IN AGND4 SOUT-P AGND3 N.C./ICLK-S AGND2 ICLK-P AGND1 IA1CLK N.C./SIN-S N.C./AVDD-S(+3.3VIAD) SIN-P +3.3V DVAA(+3.3VDA) SR4OUT N.C./MCLK-S VGG(+5VDD) IACLK MCLK-P DGND6 N.C./FSYNC-S C149 1 DGND5 SA1CLK C150 1 DGND4 FSYNC-P C125 1 DGND3 N.C./CTRLSIN-S C126 1 DGND2 CTRLSIN-P DGND1...
  • Page 46 UX-68DE FO-78DE C228 C229 R155 6 – 4...
  • Page 47 UX-68DE FO-78DE C101 C102 C104 C103 6 – 5...
  • Page 48 UX-68DE FO-78DE 6 – 6...
  • Page 49 UX-68DE FO-78DE Control PWB parts layout (Top side) 6 – 7...
  • Page 50 UX-68DE FO-78DE Control PWB parts layout (Bottom side) 6 – 8...
  • Page 51 UX-68DE FO-78DE C117 R132 BZX79B6V8 3.3/50 R111 R107 R103 R105 470K SIOV-S05K60T R106 BZX79B20V 1N4148 1N4148 6 – 9...
  • Page 52 UX-68DE FO-78DE 6 – 10...
  • Page 53 UX-68DE FO-78DE TEL/LIU PWB parts layout (Top side) 6 – 11...
  • Page 54 UX-68DE FO-78DE TEL/LIU PWB parts layout (Bottom side) 6 – 12...
  • Page 55 UX-68DE FO-78DE UPC29M05AHF 2SC4210 2SD2114K 6 – 13...
  • Page 56 UX-68DE FO-78DE Power supply PWB parts layout (Top side) Power supply PWB parts layout (Bottom side) Q4 ZD5 6 – 14...
  • Page 57 UX-68DE FO-78DE 6 – 15...
  • Page 58 UX-68DE FO-78DE M E M O 6 – 16...

  • Page 59: Parts Guide

    UX-68DE FO-78DE PARTS GUIDE UX-68 FO-78 MODEL CONTENTS Packing material & Accessories Cabinet, etc. Control PWB unit Scanner unit TEL-LIU PWB unit Upper cabinet Power supply PWB unit Document guide upper Index Drive unit Because parts marked with " " are indispensable for the machine safety maintenance and operation, it must be...

  • Page 60: Cabinet, Etc

    UX-68DE FO-78DE [1] Cabinet, etc. SWITCH CABLE MOTOR CABLE DOCUMENT GUIDE UPPER B7x2 SCANNER UNIT B7x2 DRIVE UNIT CIS EARTH CABLE B3x2 – 1 –...
  • Page 61 UX-68DE FO-78DE PRICE PART DESCRIPTION PARTS CODE RANK MARK RANK [1] Cabinet etc. DCEKK201CFF10 Operation panel unit [68] DCEKK201CFF11 Operation panel unit [78] CCNW-212AXH01 Panel cable ass’y MSPRC2954FFZZ Hopper spring NGERP2318XHZZ Pinion gear PGIDM2560XHSA Hopper,guide,left [68] PGIDM2560XHSC Hopper,guide,left [78] PGIDM2561XHSA Hopper,guide,right [68] PGIDM2561XHSC...
  • Page 62 UX-68DE FO-78DE [2] Scanner unit PRICE PART DESCRIPTION PARTS CODE RANK MARK RANK [2] Scanner unit LBSHP2110XHZZ Back roller bearing LFRM-2209FFZZ Scanner frame LHLDZ2180XHZZ CIS support,left LHLDZ2181XHZZ CIS support,right MLEVP2317XHZZ CIS release lever MSPRC3117FFZZ CIS spring NGERH2479XHZZ Back roller gear NGERH2480XHZZ Reduction gear,17/28Z NGERH2481XHZZ...

  • Page 63: Upper Cabinet

    UX-68DE FO-78DE [3] Upper cabinet B2x3 PRICE PART DESCRIPTION PARTS CODE RANK MARK RANK [3] Upper cabinet CCNW-212AXH01 Panel cable ass’y GCABA2342FFSX Upper cabinet [68] GCABA2342FFSY Upper cabinet [78] JBTN-2257FFSA 12 key [68] JBTN-2257FFSC 12 key [78] JBTN-2258FFSA Start key [68] JBTN-2258FFSC Start key...

  • Page 64: Drive Unit

    UX-68DE FO-78DE [5] Drive unit PRICE PART DESCRIPTION PARTS CODE RANK MARK RANK [5] Drive unit LFRM-2207XHZZ Drive unit frame LPLTM3049XHZZ Motor plate MCAMP2027XHZZ MLEVP2311XHZZ Planet lever A MLEVP2312XHZZ Planet lever B MLEVP2314XHZZ Mode lever MSPRC2735XHZZ Planet gear spring MSPRC3110XHZZ Cam spring NGERH2278XHZZ Planet gear...

  • Page 65: Packing Material & Accessories

    UX-68DE FO-78DE [6] Packing material & Accessories TAPE TAPE AC CORD ORIGINAL DOCUMENT SUPPORT SIDE TAPE TAPE PRICE PART DESCRIPTION PARTS CODE RANK MARK RANK [6] Packing material & Accessories TINSG4052FFZZ Operation manual [68] TINSG4053FFZZ Operation manual [78] DUNTK204CFFBG Handset [68] DUNTK204CFFWH Handset...

  • Page 66: Control Pwb Unit

    UX-68DE FO-78DE PRICE PART DESCRIPTION PARTS CODE RANK MARK RANK [7] Control PWB unit UBATL2046SCZZ Battery(CR2032T34) [BAT1] VCEAGA1HW106M Capacitor(50WV 10µF) [C1] VCEAGA1EW476M Capacitor(25WV 47µF) [C3] VCEAGA1HW106M Capacitor(50WV 10µF) [C4] VCEAGA1EW476M Capacitor(50WV 47µF) [C5] VCEAGA1EW476M Capacitor(25WV 47µF) [C7] VCEAGA1HW107M Capacitor(50WV 100µF) [C8] VCEAGA1HW106M Capacitor(50WV 10µF)
  • Page 67 UX-68DE FO-78DE PRICE PART DESCRIPTION PARTS CODE RANK MARK RANK [7] Control PWB unit VCCCTV1HH180J Capacitor(50WV 18PF) [C176] VCCCTV1HH220J Capacitor(50WV 22PF) [C177] VCKYTV1CF105Z Capacitor(16WV 1µF) [C178] VCCCTV1HH220J Capacitor(50WV 22PF) [C179] VCCCTV1HH220J Capacitor(50WV 22PF) [C180] VCCCTV1HH220J Capacitor(50WV 22PF) [C181] VCKYTV1HB222K Capacitor(50WV 2200PF) [C183] Resistor(1/10W 6.8KΩ...
  • Page 68 UX-68DE FO-78DE PRICE PART DESCRIPTION PARTS CODE RANK MARK RANK [7] Control PWB unit RCILZ2145XHZZ Coil(HM601) [L101] RCILZ2145XHZZ Coil(HM601) [L102] RCILZ2145XHZZ Coil(HM601) [L103] RCILZ2145XHZZ Coil(HM601) [L104] RCILZ2145XHZZ Coil(HM601) [L105] RCILZ2145XHZZ Coil(HM601) [L106] Resistor(1/10W 1.5KΩ ±5%) VRS-TS2AD152J [L107] RCILZ2145XHZZ Coil(HM601) [L108] Resistor(1/10W 0Ω...

  • Page 69: Tel-Liu Pwb Unit

    UX-68DE FO-78DE PRICE PART DESCRIPTION PARTS CODE RANK MARK RANK [7] Control PWB unit Resistor(1/10W 10KΩ ±5%) VRS-TS2AD103J [R163] Resistor(1/10W 10KΩ ±5%) VRS-TS2AD103J [R164] Resistor(1/10W 5.1KΩ ±5%) VRS-TS2AD512J [R165] Resistor(1/10W 10KΩ ±5%) VRS-TS2AD103J [R166] Resistor(1/10W 10MΩ ±5%) VRS-TS2AD106J [R167] Resistor(1/10W 1.0MΩ ±5%) VRS-TS2AD105J [R168] Resistor(1/10W 120Ω...
  • Page 70 UX-68DE FO-78DE PRICE PART DESCRIPTION PARTS CODE RANK MARK RANK [8] TEL/LIU PWB unit VHVRA501PV6-1 Varistor(RA-501P-V6-2) [AR2] QCNW-4753XHZZ Cable [ARG] VCQYNA1HM474K Capacitor(50WV 0.47µF) [C1] RC-FZ3053FFZZ Capacitor(250WV 1.0µF) [C2] RC-FZ3055FFZZ Capacitor(250WV 0.47µF) [C3] VCEAGA1HW106M Capacitor(50WV 10µF) [C4] VCEAGA1HW335M Capacitor(50WV 3.3µF) [C5] VCEAGA1HW226M Capacitor(50WV 22µF) [C6]...

  • Page 71: Power Supply Pwb Unit

    UX-68DE FO-78DE PRICE PART DESCRIPTION PARTS CODE RANK MARK RANK [8] TEL/LIU PWB unit Resistor(1/8W 47Ω ±5%) VRS-TP2BD470J [R112] Resistor(1/10W 1.5KΩ ±5%) VRS-TS2AD152J [R114] Resistor(1/10W 1KΩ ±5%) VRS-TS2AD102J [R115] Resistor(1/10W 10KΩ ±5%) VRS-TS2AD103J [R116] Resistor(1/10W 16KΩ ±5%) VRS-TS2AD163J [R117] Resistor(1/10W 20KΩ ±5%) VRS-TS2AD203J [R118] Resistor(1/10W 150Ω...
  • Page 72 UX-68DE FO-78DE PRICE PART DESCRIPTION PARTS CODE RANK MARK RANK [9] Power supply PWB unit 0CBUCB0199AZ/ IC(UPC29M05AHF) [IC1] 0CBUKZ0826ZZ/ Filter(ELF15N003A) [L1] 0CBUZZ0156ZZ/ Coil(RS208) [L2] 0CBPZZ0940ZZ/ Jumper(J1/6Z-T26-A) [L3] 0CBLRZ6616ZN/ Heat sink(MN903-5001AT) [MT1] 0CBLRZ6619ZQ/ Heat sink(MF903-5002AT) [MT2] 0CBUDC0163CZ/ Photo coupler(PC123YS) [PC1] 0CBUDC0163CZ/ Photo coupler(PC123YS) [PC2] 0CBUAG0161AC/...
  • Page 73 UX-68DE FO-78DE I n d e x PRICE PART PRICE PART PRICE PART PARTS CODE PARTS CODE PARTS CODE MARK MARK MARK RANK RANK RANK RANK RANK RANK RCORF2064XHZZ 1-53 CCNW-212AXH01 NGERH2278XHZZ 5-12 RCRSB0297AFZZ 7-311 ″ NGERH2379XHZZ 5-13 RCRSQ2157SCZZ 7-310 CCNW-215AFF01 1-12 NGERH2391XHZZ...
  • Page 74 UX-68DE FO-78DE PRICE PART PRICE PART PRICE PART PARTS CODE PARTS CODE PARTS CODE RANK MARK RANK RANK MARK RANK RANK MARK RANK VCEAGA1HW226M 8-13 VCKYTV1HB102K 7-57 VHVRA501PV6-1 ″ ″ ″ 8-15 7-62 ″ VCEAGA1HW335M 7-64 VHVSIOVS05K60 8-120 ″ VCEAGA1HW475M 8-10 7-65 VRD-HT2HY222J...
  • Page 75 UX-68DE FO-78DE PRICE PART PRICE PART PRICE PART PARTS CODE PARTS CODE PARTS CODE MARK MARK MARK RANK RANK RANK RANK RANK RANK VRS-TS2AD152J 8-83 VRS-TS2AD512J 7-243 0CBUEXCAS471/ 9-51 VRS-TS2AD153J 7-272 VRS-TS2AD513J 7-266 0CBUEXCAS472/ 9-55 ″ VRS-TS2AD161J 8-72 VRS-TS2AD562J 7-281 9-61 ″...
  • Page 76 UX-68DE FO-78DE © COPYRIGHT 2000 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Fo-78

Table of Contents