Registering Cordless Handsets - Sharp UX-D50 User Manual

all.book Page 56 Monday, September 1, 2003 3:46 PM

Registering Cordless Handsets

Registering Cordless Handsets
In order to be used, a cordless handset must first be registered in the fax
machine. The cordless handset that came with the fax machine is already
registered. To register an additional cordless handset, follow the steps in
Automatic registration or Custom registration on the following pages.
♦
Use automatic registration when you are only registering the cordless
handset in one fax machine and the system PIN number has not been
changed from its initial setting (0000) (see page 58). This is the easiest
method of registration and does not require entering the System PIN
number.
♦
Use custom registration when the system PIN number has been changed
to a number other than 0000. The system PIN number must be entered
during registration.
♦
A cordless handset can be registered in up to four fax machines. To register
the cordless handset in multiple fax machines, repeat the custom
registration procedure using each fax machine. To select which fax machine
the cordless handset will normally be used with, see page 61.
Automatic registration
Use automatic registration when you are only registering the cordless handset
in one fax machine and the system PIN number has not been changed from
its initial setting (0000).
On the fax machine
1
FUNKTION
Press
2
Press once.
3
Press once.
START/SPEICHER
4
Press
56
once and once.
.
Fax machine display:
DECT SETTING
HS ENTRY
PRESS START KEY
WAITING HS ENTRY