Table of Contents
Advertisement
Optional Answering System Settings
Optional Answering System Settings
Setting ICM time
Incoming messages (ICMs) are the messages which callers leave for you in
the answering system. The answering system is set at the factory to allow
each caller a maximum of 4 minutes to leave a message. If desired, you can
change this setting to 15, 30, or 60 seconds.
1
FUNCTION
Press
2
Press
3
Press
.
4
Press a number from 1 to 4 to select the desired ICM recording time.
15 seconds
1
30 seconds
2
STOP
5
Press
Fax reception on TAD failure
If the memory for recording incoming messages becomes full while you are
out, the answering system will no longer be able to record messages. The ON
TAD FAILURE setting is used to choose the response of the machine to
incoming calls when this happens:
Automatic fax reception NO: The machine will answer after 20 rings, after
which it will wait to receive a remote command. Most callers will hang up
before it answers; however, when you call the machine from a remote
location, you can wait until it answers, listen to your messages, and then
erase them (see Remote Operations on page 55).
48
once and
once.
once and
once.
The display briefly shows
your selection, then:
to return to the date and time display.
Display:
T.A.D. SETTING
RECORDING TIME
60 seconds
3
4 minutes
4
REMOTE CODE
Advertisement
Table of Contents
