Fluke 5080A Service Manual page 96

5080A
Service Manual
h Static Awareness h
X
• Minimize handling.
• Handle static-sensitive
parts by non-conductive
edges.
• Do not slide static-
sensitive components
over any surface.
• When removing plug-in
assemblies, handle only
by non-conductive
edges.
• Never touch open-edge
connectors except at a
static-free work station.
86
Semiconductors and integrated circuits can be damaged by electrostatic
discharge during handling. This notice explains how to minimize damage to
these components.
1. Understand the problem.
2. Learn the guidelines for proper handling.
3. Use the proper procedures, packaging, and bench techniques.
Follow these practices to minimize damage to static sensitive parts.
To prevent electric shock or personal injury. De-
energize the product and all active circuits before
opening a product enclosure, touching or handling
any PCBs or components
• Keep parts in the original
containers until ready for
use.
• Use static shielding
containers for handling
and transport.
• Avoid plastic, vinyl, and
Styrofoam
area.
W Warning
.
• Handle static-sensitive
• Put shorting strips on
®
in the work
• Use anti-static type
• Use grounded-tip
parts only at a static-
free work station.
the edge of the
connector to help
protect installed static-
sensitive parts.
solder extraction tools
only.
soldering irons only.