Fluke 5080A Service Manual page 68

5080A
Service Manual
Test Equipment
High Frequency
Digital Storage
Oscilloscope
Attenuator
Adapter
BNC Cable
AC Measurement
Standard
Adapter
Termination
BNC Cable
Digital Multimeter
Adapter
Termination
BNC Cable
Frequency Counter
Adapter
BNC Cable
AC Measurement
Standard
Adapter
BNC Cable
Spectrum Analyzer
Adapter
BNC Cable
58
Table 42. Required Test Equipment for SC200 Calibration (cont.)
Recommended Model
Edge Rise Time and Aberrations Verification
Tektronix 11801 with SC-
22/26 sampling head, or
Tektronix TDX 820 with
8 GHz bandwidth
Weinschel 9-10 (SMA) or
Weinschel 18W-10 or
equivalent
(supplied with SC200)
Leveled Sine Wave Amplitude Calibration and Verification
Fluke 5790A
Pomona #1269
(supplied with SC200)
DC and AC Voltage Calibration and Verification, DC Voltage Verification
Hewlett Packard 3458A
Pomona #1269
(supplied with SC200)
Leveled Sine Wave Frequency Verification
PM 6680 with Option (PM
9621, PM 9624, or
PM 9625) and (PM 9678)
Pomona #3288
(supplied with SC200)
Leveled Sine Wave Flatness (Low Frequency) Calibration and Verification
Fluke 5790A with 03
option
Pomona #3288
(supplied with SC200)
Leveled Sine Wave Harmonics Verification
Hewlett Packard 8590A
Pomona #3288
(supplied with SC200)
Minimum Specifications
Frequency 2 GHz
Resolution 4.5 mV to 2.75 V
10 dB, 3.5 mm(m/f)
BNC(f) to 3.5 mm(m)
Range 5 mV p-p to 5.5 V p-p
Frequency 50 kHz
BNC(f) to Double Banana Plug
Feedthrough 50 Ω, +1 %
BNC(f) to Double Banana Plug
Feedthrough 50 Ω, +1 %
50 kHz to 350 MHz, <1.6 ppm uncertainty
BNC(f) to Type N(m)
Range 5 mV p-p to 5.5 V p-p
Frequency 50 kHz to 10 MHz
BNC(f) to Type N(m)
BNC(f) to Type N(m)