Table of Contents
Advertisement
SERVICE PROGRAM MODE
Mode No.
1
(Class 1, 2, and 3)
003*
Paper Buckle
1
Tray: Plain
2
Tray: Thick
3
Tray: OHP
003*
4
Tray: Small Size
5
By-pass: Plain
6
By-pass: Thick
7
By-pass: OHP
8
Duplex
105*
Fusing Temperature
1
Heating: Idling
2
Heating: Ready
3
Heating: Standby
4
Heating: Plain/1 Color
5
Heating: Plain/Full
Color
6
Heating: Middle
Thick/1 Color
7
Heating: Middle
Thick/Full Color
8
Heating: Thick/1 Color
9
Heating: Thick/Full
Color
10
Heating: OHP/1 Color
Function / [ Setting ]
Adjusts the amount of paper buckle at the registration
roller by changing the paper feed timing.
[–4 ~ 6 / 0 / 1 mm/step]
[–4 ~ 6 / –2 / 1 mm/step]
[–4 ~ 6 / –2 / 1 mm/step]
[–4 ~ 6 / 0 / 1 mm/step]
Small Size includes LT long edge feed and smaller.
[–4 ~ 6 / 3 / 1 mm/step]
[–4 ~ 6 / 0 / 1 mm/step]
[–4 ~ 6 / 0 / 1 mm/step]
[–4 ~ 6 / 0 / 1 mm/step]
Sets the temperature at which the heating roller starts
idling.
[100 ~ 180 / 145 / 1°C/step]
Sets the temperature at which the heating roller enters
the print ready condition.
[100 ~ 180 / 155 / 1°C/step]
Sets the heating roller temperature for the ready
(standby) condition. After the main switch has been
turned on, the machine enters this condition when the
heating roller temperature reaches the temperature
specified in this SP mode. When the machine is
recovering from energy saver or auto off mode, the
machine becomes ready when both heat and pressure
roller temperatures reach the specified temperature.
Pressure roller: SP1-105-16
[100 ~ 180 / 160 / 1°C/step ]
Sets the heating roller temperature for thin paper in
single-color mode.
[120 ~ 190 / 155 / 1°C/step]
Sets the heating roller temperature for thin paper in full-
color mode.
[120 ~ 190 / 160 / 1°C/step]
Sets the heating roller temperature for normal plain
paper in single-color mode.
[120 ~ 190 / 165 / 1°C/step]
Sets the heating roller temperature for normal plain
paper in full-color mode.
[120 ~ 190 / 170 / 1°C/step]
Sets the heating roller temperature for thick paper in
single-color mode.
[120 ~ 190 / 165 / 1°C/step]
Sets the heating roller temperature for thick paper in full-
color mode.
[120 ~ 190 / 170 / 1°C/step]
Sets the heating roller temperature for OHP sheets in
single-color mode.
[120 ~ 190 / 165 / 1°C/step]
5-6
10 February, 2005
Advertisement
Table of Contents
