Table of Contents
Advertisement
10 February, 2005
Mode No.
7
(Class 1, 2, and 3)
833
Coverage
1
Last: M
2
Last: C
3
Last: Y
4
Last: Bk
5
Average: M
6
Average: C
7
Average: Y
8
Average: Bk
834
Tnr Consume (Toner Consume)
5
M
6
C
7
Y
8
Bk
835
ACC Counter
1
Copy ACC
2
Printer ACC
836
Total Memory Size
1
Total Memory Size
850
High Duty Cnt (High Duty Counter)
1
M
2
C
3
Y
4
Bk
852
DF Glass Dust Chk Cnt (DF Glass Dust Check Counter)
1
DF Glass Dust Chk
Cnt
901
Assert Info. (Assert Information)
1
File Name
2
Number of Lines
3
Location
Function / [ Setting ]
Displays coverage ratios.
[0.00 ~ 100.0 / 0.00 / 0.01 %step]
This SP mode displays the "coverage ratio" of the
output, i.e. the ratio of the total pixel area of the
image data to the total printable area on the paper.
Do not use this counter for billing purposes. This is
because this value is not directly proportional to the
amount of toner consumed, although of course
it is one factor that affects this amount. The other major
factors involved include: the type, total image
area and image density of the original, toner
concentration and developer potential.
Last: This is the coverage for the previous sheet.
Average: This is the average coverage for each sheet.
Displays the coverage ratios, including toner
revitalization mode.
[0 ~ 9999999 / 0 / 1 /step]
This displays the average coverage ratio, including toner
consumed during printing and toner consumed during
toner revitalization mode (SP3-971).
Do not use this counter for billing purposes.
Displays the number of times ACC has been done for
each mode.
[0 ∼ 9999999 / 0 / 1 /step]
Displays the memory capacity.
Used for the toner revitalization process (SP3-971).
Counts the number of developments made during the
past 12 hours.
Displays the number of times that dust was detected on
the DF glass.
Records the location where the last problem (SC990)
was detected in the program. The data stored in this SP
is used for problem analysis.
[0 ~ 0 / 0 / 0 /step]
5-63
SERVICE PROGRAM MODE
Advertisement
Table of Contents
