Main Machine Output Check (Sp5-804) - Ricoh TH-C1b Service Manual

10 February 2005
5.1.5 OUTPUT CHECK
NOTE: Motors keep turning in this mode regardless of upper or lower limit sensor
signals. To prevent mechanical or electrical damage, do not keep an
electrical component on for a long time.

Main Machine Output Check (SP5-804)

1. Open SP5-804.
2. Select the SP number that corresponds to the component you wish to check.
(Refer to the table below.)
3. Touch ON to test the selected item. Press OFF to end the test.
NOTE: You cannot exit and close this display until you touch OFF to switch off
the output check currently executing. Do not keep an electrical
component switched ON for a long time.
Output Check Table
SP5-804
-XXX
1 Feed Mot: 89 mm/s
2 Feed Mot: 120 mm/s
3 Feed Mot: 178 mm/s
4 Feed Mot: 240 mm/s
5 Upper Paper Feed
Clutch
6 Lower Paper Feed
Clutch
7 Upper Relay Roller
Clutch
8 Lower Relay Roller
Clutch
9 Transfer Motor: Half
Speed
Description
Paper feed motor: 89 mm/s
Paper feed motor: 120 mm/s
Paper feed motor: 178 mm/s
Paper feed motor: 240 mm/s
Tray 1 paper feed clutch
Tray 2 paper feed clutch
Tray 1 vertical transport clutch
Tray 2 vertical transport clutch
Main motor: 178 mm/s
5-109
SERVICE PROGRAM MODE
B156S505.WMF