Table of Contents
Advertisement
10 February 2005
6. Turn the operation switch and
main power switch off.
7. Remove the slot cover [A] (! x 1).
8. Turn the SD-card face [B] to the
rear of the machine. Then push it
slowly into slot 2 until you hear a
click.
9. Connect the network cable, if the
NIB option is installed.
10. Turn the main power switch on.
11. Go into the SP mode. Do SP5-
878 and push 'EXECUTE'.
12. Go out of the SP mode, turn the
operation switch off, then turn the
main power switch off.
13. Turn the machine power on.
14. Go into the User Tools mode, and select System Settings> Administrator
Tools> Auto Erase Memory Setting> On.
15. Go out of the User Tools mode.
16. Check the display and make sure that the overwrite erase icon [A] is displayed.
17. Make a Sample Copy.
18. Check the overwrite erase icon.
The icon [C] changes to [D] when job data is stored in the hard disk.
•
The icon goes back to its usual shape [E] after this function has completed a
•
data overwrite operation to the hard disk.
19. Remove the Document Server and Scanner key-tops, and replace them with
the blank key-tops that are supplied with the kit.
DATA OVERWRITE SECURITY UNIT (B735)
[C]
09/09/2003
14:13
Origi
Total
Copies
.
0
1
0
B735I904.WMF
1-63
[A]
[B]
[D]
B735I001.WMF
[E]
B735I905.WMF
Advertisement
Table of Contents
