Table of Contents
Advertisement
DATA OVERWRITE SECURITY UNIT (B735)
Installation Procedure
!
CAUTION
The machine must always be turned off and its power cord disconnected
before you do this procedure.
NOTE: You must install the data overwrite protection unit in SD Card slot 2. But,
the postscript option for this machine is also installed in SD Card slot 2.
Because of this, you must do the SD Card Appli move procedure first (☛
5.9) if the postscript option is installed and you want to install the Data
Overwrite Security unit. Move the Data Overwrite Security application (slot
3) to the SD Card that contains the Printer/Scanner application (slot 1).
1. If the machine is on, turn off the main power switch.
2. Disconnect the network cable.
3. Turn the main power switch on.
4. Do the "Copy SPs" in the table below.
SP No.
5871-001
5967-001
5846-090
5836-001
5. Do the "Printer SP" in the table below.
SP No.
1006-001
SP Name
HDD Function Disable
Copy Server Set Function
USC Settings - Plain Data Forbidden
Capture Setting – Capture Function
SP Name
Sample/Locked Print
1-62
10 February 2005
Set To:
1 (On)
1 (Off)
1 (Check)
1 (On)
Set To:
1 (On)
Advertisement
Table of Contents
