Ricoh TH-C1b Service Manual page 268

10 February, 2005
Mode No.
7
(Class 1, 2, and 3)
908 Proc Cont Cnter (Process Control Counter)
1 Proc Cont Cnter
909 Proc Cont Reset (Process Control Reset)
1 Proc Cont Reset
913 Oil Cnter (Oil Counter)
1 Oil Cnter
914 Oil Cln Cnt Rst (Oil Clean Counter Reset)
1 Oil Cln Cnt Rst
915 Proc Error Log (Process Error Log)
1 Log 1
2 Log 2
3 Log 3
920 Machine Counter
1 Machine Counter
921 Machine Cnt Clr (Machine Counter Clear)
1 Machine Cnt Clr
922 Toner End Cnter (Toner End Counter)
1 K Toner
2 C Toner
3 M Toner
4 Y Toner
923 Toner End Cnt Clr (Toner End Counter Clear)
1 K Toner
2 C Toner
3 M Toner
4 Y Toner
100 All
924 Charger Cln Cntr (Charger Clean Counter)
1 Charger Cln Cntr
Function / [ Setting ]
Displays the process control counter.
[0 ~ 9999999 / 0 / 1 sheet/step]
Resets the process control counter.
Displays the oil supply unit counter.
[0 ~ 65535 / 0 / 1 sheet/step]
Resets the oil cleaner counter.
Displays the latest three process control error logs.
The following are the error codes:
Development unit initial settings errors:
• 110: Incorrect image detected by cyan ID sensor
• 116: Incorrect image detected by magenta ID
sensor
• 118: No black image
Development bias settings errors:
• 113: Incorrect image detected by cyan ID sensor
• 114: Incorrect image detected by magenta ID
sensor
• 115: Incorrect image detected by yellow ID sensor
• 123: Incorrect image detected by black ID sensor
ID sensor errors:
• 103: ID sensor error
• 104: ID sensor unable to detect image
• 105: OPC belt not detected
[0 ~ 0xFFFFFFF / 0 / 1 /step]
Clears the machine counter.
Displays the toner end counter, which indicates the
possible print count after a toner near end.
Clears the toner end counter (SP7-922).
The machine goes back to the normal operation mode if
the toner end counter is cleared.
Displays how many times the charge corona wire has
been cleaned.
[0 ~ 9999999 / 0 / 1 sheet/step]
SP7-926 resets the counter.
5-65
SERVICE PROGRAM MODE