Ricoh TH-C1b Service Manual page 240

10 February, 2005
Mode No.
5
(Class 1, 2, and 3)
611 2nd. Single Color Adj.
1 B–C
2 B–M
3 G–C
4 G–Y
5 R–M
6 R–Y
801 Memory Clear – Refer to section 5.1.9 for how to use this SP
1 All Clear
2 Engine Clear
3 SCS
4 IMH Memory Clr
5 MCS
6 Copier application
7 Fax Application
8 Printer Application
9 Scanner Application
10 Web Service/Network
Application
11 NCS
12 R-FAX
14 Clear DCS Setting
15 Clear UCS Setting
16 MIRS Setting
17 CCS
802 Free Run
1 A4: BANK 2: Bk
2 A4: TRAY 1: Bk
3 A4: By-pass: Bk
4 A4: BANK 2: FC
5 All Mode
803 Input Check (See section 5.1.4, "Input Check")
804 Output Check (See section 5.1.5, "Output Check".)
810 SC Reset
1 SC Reset
811 Serial Number Display
2 SN Display
812* Service Telephone No. Setting
1 Service
2 Facsimile
3 Supply
4 Operation
Function / [ Setting ]
[0 ∼ 100 / 90 / 1 %/step]
[0 ∼ 100 / 60 / 1 %/step]
[0 ∼ 100 / 85 / 1 %/step]
[0 ∼ 100 / 80 / 1 %/step]
[0 ∼ 100 / 95 / 1 %/step]
[0 ∼ 100 / 65 / 1 %/step]
Clears the settings from the NVRAM and initializes the
settings.
Clears the engine settings.
Clears the system settings.
Clears IMH data. DFU
Clears MCS data. DFU
Clears the copy settings.
Clears the fax settings.
Clears the user tool settings.
Clears the scanner settings.
This SP must be performed after updating the scanner
software.
Clears the net file settings.
Clears the network settings.
Clears the R-FAX settings.
Clears the DCS settings.
Clears the UCS settings.
Clears the MIRS settings.
Clears the CCS settings.
Makes a free run test.
All mode: Goes through tests 1 to 4.
[0 ~ 1 / 0 / 1/step]
• 0: OFF
• 1: ON
Resets a fusing-related SC.
Resets a type A service call condition.
NOTE: Turn the main switch off and on after using this
SP.
Displays the machine serial number.
5-812-1: Service representative telephone number
5-812-2: Service representative fax number
5-812-3: Number for ordering consumables
5-812-4: Telephone number of the sales representative
• Both numbers and alphabetic characters can be input.
5-37
SERVICE PROGRAM MODE