A R Commands
disable fips-mode
To disable FIPS (Federal Information Processing Standard) mode, use the disable fips-mode command.
disable fips-mode
Syntax Description
This command has no arguments or keywords.
Security (/security) mode
Command Modes
Command History
Release
1.1(1)
A reboot of the system will be required after this command is committed.
Usage Guidelines
Example
This example shows how to enter security mode and disable FIPS mode:
FP9300-A # scope security
FP9300-A /security # disable fips-mode
Warning: A reboot of the system is required in order for the system to be
operating in a non-FIPS approved mode.
FP9300-A /security* #
Related Commands
Command
enable fips-mode
show fips-mode
Modification
Command added.
Description
Enables FIPS mode.
Shows current FIPS mode admin and operational states.
Cisco Firepower 4100/9300 FXOS Command Reference
disable fips-mode
89