Cisco Firepower 4100 Command Reference Manual page 289

Fully integrated next-generation firewall
Hide thumbs Also See for Firepower 4100:
Table of Contents

Advertisement

S Commands
show interface brief (connect fxos)
Field
Description
Suspended due to external Loopback diagnostics failure
Invalid fabric binding exchange
Isolation due to TOV Mismatch
Error disabled due to ficon not enabled
Error disabled due to no ficon portnumber for logical interface
Ficon being enabled
Port down because prohibit mask in place for E TE port
Gracefully shutdown
Not all VSANs UP on the trunk
Isolation due to fabric binding peer switch WWN not found
Isolation due to fabric binding peer domain mismatch
Isolation due to fabric binding database mismatch
Isolation due to fabric binding no response from peer
Suspended due to dynamic vsan suspension
Suspended due to dynamic vsan not found
All tracked ports down
Suspended as extended credit mode not allowed for loop ports
Isolation due to portchannel misconfiguration
Peer device does not support portchannels
Isolation during port bringup
Isolation due to domain not allowed
Isolation due to virtual IVR domain overlap
Out of service
Authentication failed
Unidirectional UDLD detected
UDLD Tx Rx loop
UDLD neighbor mismatch
UDLD empty echo
UDLD detected link failure in aggressive mode
Port connector type error
Error disabled due to reinit limit reached
Duplicate port num in VSAN
Internal RCF in progress
Cisco Firepower 4100/9300 FXOS Command Reference
287

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Firepower 9300

Table of Contents