Set Admin-State - Cisco Firepower 4100 Command Reference Manual

set admin-state

set admin-state
To enable or disable the administrative state of a Smart Call Home policy, use the set adminstate command.
set admin-state {disabled|enabled}
Syntax Description
disabled
enabled
Policy (monitoring/callhome/policy) mode
Command Modes
Command History
Release
1.1(1)
Use this command to enable or disable the Call Home policy when a fault or system event matching the
Usage Guidelines
associated cause is encountered.
Example
This example shows how to enter and enable a Call Home policy instance for link-down events:
FP9300-A /monitoring/callhome # enter policy link-down
FP9300-A /monitoring/callhome/policy* # set admin-state enabled
FP9300-A /monitoring/callhome/policy* # commit-buffer
FP9300-A /monitoring/callhome/policy #
Related Commands
Command
enter policy
delete policy
show
Cisco Firepower 4100/9300 FXOS Command Reference
164
Sets the policy administrative state to disabled.
Sets the policy administrative state to enabled.
Modification
Command added.
Description
Enters a Smart Call Home policy.
Deletes an existing Smart Call Home policy.
Displays Call Home configuration or policy information.
S Commands