Set Remote-User - Cisco Firepower 4100 Command Reference Manual

S Commands

set remote-user

To restrict access to those users matching an established user role, use the set remote-user command.
set remote-user default-role {assign-default-role|no-login}
Syntax Description
assign-default-role
no-login
Security mode
Command Modes
Command History
Release
1.1(1)
assign-default-role is the default behavior.
Usage Guidelines
Example
This example shows how to enter security mode and deny access to users without a user role:
FP9300-A# scope security
FP9300-A /security # set remote-user default-role no-login
FP9300-A /security* # commit-buffer
FP9300-A /security #
Related Commands
Command
set authentication
When a user attempts to log in and the remote authentication provider does
not supply a user role with the user's authentication information, the user is
allowed to log in with a read-only user role.
When a user attempts to log in and the remote authentication provider does
not supply a user role with the user's authentication information, access is
denied.
Modification
Command added.
Description
Specifies the default authentication service.
Cisco Firepower 4100/9300 FXOS Command Reference
set remote-user
221