Clear Lock-Status - Cisco Firepower 4100 Command Reference Manual

A R Commands

clear lock-status

To clear a user's locked-out status, use the clear lock-status command in local user mode.
clear lock-status
Syntax Description
This command has no arguments or keywords.
Local user (/security/local-user)
Command Modes
Command History
Release
1.1(1)
If any user (including admin users) exceeds the specified maximum number of login attempts, the user is
Usage Guidelines
locked out of the system and must wait the specified amount of time before being allowed to log in, unless
you clear the user's locked-out status.
Example
This example shows how to enter local user mode and specify the amount of time that must pass
before a locked-out user can log in.
FP9300-A # scope security
FP9300-A # scope local-user test_user1
FP9300-A /security/local-user # clear lock-status
FP9300-A /security/local-user* # commit-buffer
FP9300-A /security/local-user #
Related Commands
Command
set max-login-attempts
set
user-account-unlock-time
Modification
Command added.
Description
Specifies the maximum number of failed login attempts before the user is
locked out of the system.
Specifies the amount of time a user remains locked out of the system after
reaching the maximum number of login attempts.
Cisco Firepower 4100/9300 FXOS Command Reference
clear lock-status
33