Set Address - Cisco Firepower 4100 Command Reference Manual

S Commands

set address

To set an email or URL address for a Smart Call Home or Smart Licensing destination, use the set address
command.
set address address
Syntax Description
address
scope monitoring/scope callhome/scope profile/scope destination/
Command Modes
Command History
Release
1.4(1)
Each Firepower 4100/9300 chassis must be registered with the Smart Call Home License Authority or Smart
Usage Guidelines
License satellite server. Use this command to set an email or HTTP/HTTPS URL address as the licensing
destination.
License Authority example:
Satellite server example:
Example
This example shows how to create and enter a Smart Call Home destination:
firepower # scope monitoring
firepower /monitoring # scope callhome
firepower /monitoring/callhome # scope profile SLProfile
firepower /monitoring/callhome/profile # scope destination SLDest
firepower /monitoring/callhome/profile/destination # set address
https://tools.cisco.com/its/service/oddce/services/DDCEService
firepower /monitoring/callhome/profile/destination* # commit-buffer
firepower /monitoring/callhome/profile/destination #
Related Commands
Command
create destination
delete destination
set protocol
The email address or URL of the Smart Call Home or Smart Licensing
destination.
Modification
Command added.
https://tools.cisco.com/its/service/oddce/services/DDCEService
https://ip_address/Transportgateway/services/DeviceRequestHandler
Description
Creates a new Smart Call Home destination.
Deletes an existing Smart Call Home destination.
Sets the transport protocol for a Smart Call Home destination.
Cisco Firepower 4100/9300 FXOS Command Reference
set address
163