Scope Adapter - Cisco Firepower 4100 Command Reference Manual

scope adapter

scope adapter
To enter adapter mode, use the scope adapter command.
scope adapter {rack_server/id|chassis/server/id}
Syntax Description
rack_server/id
chassis/server/id
EXEC mode
Command Modes
Command History
Release
1.1(1)
In adapter mode, you can activate or update a firmware version, view a variety of adapter-specific data, and
Usage Guidelines
scope into host and external Ethernet interfaces.
Example
This example shows how to enter adapter mode using the chassis, server and adapter IDs:
FP9300-A# scope adapter 1/1/1
FP9300-A /chassis/server/adapter #
Related Commands
Command
connect adapter
scope chassis
Cisco Firepower 4100/9300 FXOS Command Reference
126
The adapter location specified using the rack-server and adapter IDs entered
in n/n format.
The adapter location specified using the chassis, server and adapter IDs entered
in n/n/n format.
Note The chassis ID is always 1.
Modification
Command added.
Description
Connects to the command shell for a specific adapter.
Enters chassis mode.
S Commands