Set Con-Session-Timeout - Cisco Firepower 4100 Command Reference Manual

set con-session-timeout

set con-session-timeout
To set the serial console idle session timeout, use the set con-session-timeout command.
set con-session-timeout seconds
Syntax Description
seconds
Default authentication mode
Command Modes
Command History
Release
1.1(1)
Use this command to specify the idle session timeout for serial console sessions.
Usage Guidelines
Example
This example shows how to enter default authentication mode and then set the serial console idle
timeout to four minutes:
FP9300-A# scope security
FP9300-A /security # scope default-auth
FP9300-A /security/default-auth # set con-session-timeout 240
FP9300-A /security/default-auth* # commit-buffer
FP9300-A /security/default-auth #
Related Commands
Command
set refresh-period
show detail
Cisco Firepower 4100/9300 FXOS Command Reference
178
Serial console idle session timeout; value can be 0 to 3600 seconds. To disable
this timeout, set the value to 0.
Modification
Command added.
Description
Sets the Web session refresh period.
Displays the current session and absolute session timeout settings.
S Commands