Show Fabric-Interconnect - Cisco Firepower 4100 Command Reference Manual

show fabric-interconnect

show fabric-interconnect
To display fabric interconnect information, use the show fabric-interconnect command.
show fabric-interconnect [
a|b|detail|environment|firmware|fsm|inventory|mac-aging|mode|version]
Syntax Description
a
b
detail
environment
firmware
fsm status
inventory
mac-aging
mode
version
Any command mode
Command Modes
Cisco Firepower 4100/9300 FXOS Command Reference
264
(Optional) Displays fabric interconnect information for Fabric A. Use the
optional detail keyword to show detailed information for the fabric.
There is only one fabric; it is labeled A. Thus, there is no need to
Note
enter this keyword.
(Optional) Do not use: there is no Fabric B.
(Optional) Displays detailed fabric interconnect information.
(Optional) Displays information about installed fabric cards. These optional
keywords are available:
• a —Displays information for only Fabric A. This keyword is
optional—there is only one fabric.
• b —Do not use: there is no Fabric B.
• detail —Displays detailed environment information.
• expand —Displays expanded environment information. The detail
keyword is available with this option.
• fan —Displays fan-specific information. The keywords detail and
psuavailable with this option.
• psu —Displays power-supply-unit-specific information. The keywords
detail and fanavailable with this option.
(Optional) Displays firmware information.
(Optional) Displays finite state machine status information.
(Optional) Displays basic hardware information about the fabric. The keywords
detail, expand and idavailable with this option.
(Optional) Displays MAC table aging time.
(Optional) Displays fabric interconnect mode information.
(Optional) Displays firmware version information.
S Commands