Create Profile - Cisco Firepower 4100 Command Reference Manual

A R Commands

create profile

To add a new Smart Call Home and Smart Licensing destination profile, use the create profile command. If
a profile with the specified name already exists, the command will fail.
To add or edit a destination profile, use the enter profile command. If the specified profile does not exist, it
is created and entered; if the profile exists, it is entered.
You also can use the scope form of this command to enter an existing profile to assign or change properties.
If the profile does not exist, the command will fail.
To delete an existing profile, use the delete form of this command.
create profile name
delete profile name
enter profile name
scope profile name
Syntax Description
name
scope monitoring/scope callhome/
Command Modes
Command History
Release
1.1(1)
When you create a new Smart Call Home profile, you are automatically entered into callhome/profile mode
Usage Guidelines
(monitoring/callhome/profile) with an asterisk indicating the new profile is not yet committed. You can define
the profile, and then commit the new profile information.
After you create a Smart Call Home destination profile, the profile name cannot be changed. You must delete
the profile and create a new one.
Example
This example shows how to create and enter a Smart Call Home destination profile:
firepower # scope monitoring
firepower /monitoring # scope callhome
firepower /monitoring/callhome # enter profile TestProfile
firepower /monitoring/callhome/profile* # commit-buffer
firepower /monitoring/callhome/profile #
Related Commands
Command
delete profile
set
The name identifying the destination profile.
Modification
Command added.
Description
Deletes an existing Smart Call Home destination profile.
In monitoring/callhome mode, sets profile properties.
Cisco Firepower 4100/9300 FXOS Command Reference
create profile
71