Show (Management Interface) - Cisco Firepower 4100 Command Reference Manual

S Commands

show (management interface)

To view current management-interface information, use the show command in fabric interconnect mode.
show
Syntax Description
In fabric interconnect mode, this command has a number of keywords, but entering show without any
modifiers displays the current fabric management-interface information.
scope fabric-interconnect/
Command Modes
Command History
Release
1.1(1)
By default, this command displays IPv4 and IPv6 management-interface information. Appending the detail
Usage Guidelines
keyword displays this interface information, along with some additional fabric-specific information.
Example
This example shows how to display management-interface information:
firepower# scope fabric-interconnect
firepower /fabric-interconnect # show
Fabric Interconnect:
ID
Prefix Operability
---- --------------- --------------- --------------- ---------------- ----------------
------ -----------
A
firepower /fabric-interconnect #
Related Commands
Command
scope fabric-interconnect
show ipv6-if
Modification
Command added.
OOB IP Addr OOB Gateway
192.0.2.112 192.0.2.1
Operable
Description
Enters fabric interconnect mode.
Shows the current device management IPv6 address.
OOB Netmask OOB IPv6 Address OOB IPv6 Gateway
255.255.255.0 ::
Cisco Firepower 4100/9300 FXOS Command Reference
show (management interface)
:: 64
241