Set Regenerate - Cisco Firepower 4100 Command Reference Manual

S Commands

set regenerate

To regenerate the keys in the default keyring, use the set regenerate command.
set regenerate {no|yes}
Syntax Description
no
yes
Keyring mode
Command Modes
Command History
Release
1.1(1)
Use this command to regenerate the RSA keys in the default keyring. This command is accepted only in the
Usage Guidelines
default keyring.
Example
This example shows how to regenerate the keys in the default keyring:
FP9300-A# scope security
FP9300-A /security # scope keyring default
FP9300-A /security/keyring # set regenerate yes
FP9300-A /security/keyring* # commit-buffer
switch-A /security/keyring #
Related Commands
Command
set cert
set modulus
set trustpoint
Do not regenerate the keys.
Regenerate the keys.
Modification
Command added.
Description
Enters an RSA certificate for a keyring.
Specifies the RSA key modulus (SSL key length) in bits.
Specifies whether the keyring certificate can be regenerated.
Cisco Firepower 4100/9300 FXOS Command Reference
set regenerate
217