Show Eth-Uplink - Cisco Firepower 4100 Command Reference Manual

show eth-uplink

show eth-uplink
To display Ethernet uplink information, use the show eth-uplink command.
show eth-uplink [detail|expand|fsm]
Syntax Description
detail
expand
fsm status
Any command mode
Command Modes
Command History
Release
1.1(1)
Example
This example shows how to display expanded Ethernet uplink information:
firepower# show eth-uplink expand
Ethernet Uplink:
firepower# show eth-uplink expand
Ethernet Uplink:
Cisco Firepower 4100/9300 FXOS Command Reference
260
(Optional) Displays details about the Ethernet uplink.
(Optional) Displays expanded information about the Ethernet uplink.
(Optional) Displays the finite state machine status.
Modification
Command added.
Mode MAC Table Aging Time (dd:hh:mm:ss) VLAN Port Count Optimization
------------- ---------------------------------- ----------------------------
Security Node 00:04:01:40
Mode: Security Node
MAC Table Aging Time (dd:hh:mm:ss): 00:04:01:40
VLAN Port Count Optimization: Disabled
Ethernet Link Profile:
Name UDLD link policy name Oper UDLD link policy name
---------- --------------------- --------------------------
default default
Fabric:
Fabric ID: A
Interface:
Port Name: Ethernet1/1
Port Type: Mgmt
Admin State: Enabled
Oper State: Link Down
State Reason: Link failure or not-connected
<--- intevening lines removed for brevity --->
Port Name: Ethernet2/6
Port Type: Data
Admin State: Disabled
Oper State: Admin Down
Disabled
fabric/lan/udld-link-pol-default
S Commands