Show Version - Cisco Firepower 4100 Command Reference Manual

S Commands

show version

To display the current system software-version information, use the show version command.
show version [ detail]
To display software-version and status information for all the chassis components, use the show version
command in chassis mode.
show version [ detail|package-version]
To display software-version and status information for a serverʼs components, use the show version command
in server mode. In server mode, you also can show version information for individual components.
show version [adapter|bios|boardcontroller|cimc| detail|fxos|package-version|storage|]
Syntax Description
adapter
bios
boardcontroller
cimc
detail
fxos
package-version
storage
Any command mode – shows system software-version information
Command Modes
Chassis mode – shows software-version and status information for all chassis components
Server mode – shows software-version and status information for the connected serverʼs components
Command History
Release
1.1(1)
The package-version keyword is available only in adapter, chassis, fabric-interconnect, server, and system
Usage Guidelines
modes.
(Optional) Show version information for adapters installed in the connected
server. This keyword is available only in server mode.
(Optional) Show BIOS version information for the connected server. This
keyword is available only in server mode.
(Optional) Show Management Controller version information for the connected
server. This keyword is available only in server mode.
(Optional) Show CIMC version and status information for the connected server.
This keyword is available only in server mode.
(Optional) Show additional verison information.
(Optional) Show SSP operating system version information for the connected
server. This keyword is available only in server mode.
(Optional) Show only package-verison information. This keyword is available
only in adapter, chassis, fabric-interconnect, server, and system modes.
(Optional) Show version information for RAID and local disk controllers for
the connected server. This keyword is available only in server mode.
Modification
Command added.
Cisco Firepower 4100/9300 FXOS Command Reference
show version
373