Show Mgmt-Port - Cisco Firepower 4100 Command Reference Manual

show mgmt-port

show mgmt-port
To view status information for the device management port, use the show mgmt-port command.
(local-mgmt)# show mgmt-port
Syntax Description
This command has no arguments or keywords.
connect local-mgmt
Command Modes
Command History
Release
1.1(1)
Use this command to view information about configuration and status of the device management interface.
Usage Guidelines
Example
This example shows how to display management port information:
firepower # connect local-mgmt
firepower(local-mgmt)# show mgmt-port
eth0
firepower(local-mgmt)#
Related Commands
Command
show open-network-ports
Cisco Firepower 4100/9300 FXOS Command Reference
308
Modification
Command added.
Link encap:Ethernet HWaddr b0:aa:77:2f:f0:a9
inet addr:10.89.5.14 Bcast:10.89.5.63
inet6 addr: fe80::b2aa:77ff:fe2f:f0a9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST
RX packets:174151 errors:0 dropped:0 overruns:0 frame:0
TX packets:101268 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:15273492 (14.5 MiB)
Description
Shows all open network ports.
Mask:255.255.255.192
MTU:1500 Metric:1
TX bytes:80246582 (76.5 MiB)
S Commands