Enable - Cisco Firepower 4100 Command Reference Manual

enable

enable
To enable an existing application instance, use the enable command.
Syntax Description
This command has no arguments or keywords.
Application instance (/ssa/slot/app-instance) mode
Command Modes
Command History
Release
1.1(1)
Use this command to re-enable an application instance that was previously disabled.
Usage Guidelines
Example
This example shows how to display current application instances, including their status, then enter
application instance mode and enable a disabled application:
FP9300-A # scope ssa
FP9300-A /ssa # scope slot 2
FP9300-A /ssa/slot # show app-instance
Application Instance:
Deploy Type Profile Name Cluster State
----------- ------------ --------------- ------------
Native
Application Instance:
Deploy Type Profile Name Cluster State
----------- ------------ --------------- ------------
Container
FP9300-A /ssa/slot # scope app-instance ftd2 FTD-2
FP9300-A /ssa/slot/app-instance # enable
FP9300-A /ssa/slot/app-instance* # commit-buffer
FP9300-A /ssa/slot/app-instance #
Related Commands
Command
disable
scope app-instance
Cisco Firepower 4100/9300 FXOS Command Reference
94
Modification
Command added.
App Name Identifier Admin State Oper State
---------- ---------- ----------- ---------------- --------------- ---------------
ftd1 IFT-63 Enabled
In Cluster
App Name Identifier Admin State Oper State
---------- ---------- ----------- ---------------- --------------- ---------------
ftd2 FTD-2 Disabled
bronze Not Applicable
Description
Disables an existing application instance.
Enters application mode for a specific application instance.
Running Version Startup Version
Cluster Role
Online 6.3.0.12
Slave
Running Version Startup Version
Cluster Role
Online 6.3.0.12
None
A R Commands
6.3.0.12
6.3.0.12