Cisco Firepower 4100 Command Reference Manual page 278

show identity
wwn
Any command mode
Command Modes
Command History
Release
1.1(1)
IQN pools and prefixes must be configured in order to use the show identity iqn command.
Usage Guidelines
Example
This example shows how to display detailed identity information for the device's IPv4 addresses:
FP9300-A# show identity ip-addr detail
IP Address: 192.0.2.9
IP Address: 192.0.2.10
IP Address: 192.0.2.11
IP Address: 192.0.2.12
FP9300-A#
Related Commands
Command
show server identity
Cisco Firepower 4100/9300 FXOS Command Reference
276
(Optional) Displays the world-wide name (WWN) information for a system.
The following optional keywords are also available:
Modification
Command added.
Assigned: No
Assigned Service Profile:
Owner: Pool
Assigned: No
Assigned Service Profile:
Owner: Pool
Assigned: No
Assigned Service Profile:
Owner: Pool
Assigned: No
Assigned Service Profile:
Owner: Pool
<--- remaining lines removed for brevity --->
Description
Shows identity information for a servers, adapters and interfaces.
• detail —Displays details about the identity information in list format.
• id —Displays identity information for a specific WWN; provide a unique
WWN identifier in the form
• pool-info —Displays identity information for the pool. The detail
keyword is also available.
• profile-info —Displays identity information for the profile. The detail
keyword is also available.
.
FF:FF:FF:FF:FF:FF:FF:FF
S Commands