Commit-Buffer - Cisco Firepower 4100 Command Reference Manual

commit-buffer

commit-buffer
To save or verify configuration changes, use the commit-buffer command.
commit-buffer [verify-only]
Syntax Description
verify-only
Any command mode
Command Modes
Command History
Release
1.1(1)
Use this command to execute or verify all pending configuration changes. While any configuration changes
Usage Guidelines
are pending, an asterisk (*) appears before the command prompt. When you enter the commit-buffer command,
the pending commands are committed and the asterisk disappears.
Example
This example shows how to save configuration changes:
FP9300-A# create org 3
FP9300-A /org* # commit-buffer
FP9300-A /org #
Related Commands
Command
discard-buffer
show configuration
pending
Cisco Firepower 4100/9300 FXOS Command Reference
36
(Optional) Verifies/validates buffer contents only; the contents are not
committed.
Modification
Command added.
Description
Cancels and discards all uncommitted configuration changes.
Shows all pending configuration changes.
A R Commands