How To Secure The Media - Roland VersaUv LEF - 12i Master Manual

How to Secure the Media

Conditions for Usable Media
*In this manual, the printing material used for output is called "media. "
Maximum size: Width 335 mm (13.19 in.) x depth 310 mm (12.2 in.) x height 100 mm (3.94 in.)
Maximum weight: 5 kg (11.02 lb.)
 Do not use media that is charged with static electricity.
 This printer cannot print on all materials. When selecting media, be sure to carry out testing in
advance to make sure that satisfactory print quality can be obtained.
 There is a limit to the variation in the unevenness on the print surface.
 P. 37, "Height Settings When the Print Surface is Uneven"
 Depending on the type of media and the installation method, the height may not be set correctly.
The machine may malfunction if printing is performed under these conditions. Do not use the
following types of media.
Media that easily becomes loose
If the media becomes loose, the head gap
sensor cannot detect the height correctly. Be
sure to secure the media without looseness.
If the media does become loose, you can use
an adhesive sheet to hold it in place.
Media made from soft material
If the media is made from soft material, the
pressure applied against the head gap sensor
is too weak. This prevents it from detecting
the height correctly.
Chapter 1 Basic Operation
Basic Operation
11