Table of Contents
Advertisement
Step 4: Remove the Protective Media
The protective media shown below is attached to this machine when it is shipped from the factory. When you have
finished installing the machine, remove all protective media.
Packing
Front
6) Peel off the tape.
Rear
1) Remove packings.
3) Peel off the tape,
and remove the
packing. (Pull straight
back toward you to
extract.)
5) Remove the retainer (2).
1-3 Assembling and Installing
Packing
4) Remove the retainer (1).
If the screw for the retainer is difficult
to loosen, use a screwdriver to remove
it.
Retainer (1)
7) Attach the retainer you removed
in step 4) and 5).
Chapter 1 - Getting Started
2) Peel off the tape.
Retainer (2)
23
Advertisement
Table of Contents
