Table of Contents
Advertisement
SUB MENU
INK CONTROL
INK CONTROL
HEAD WASH
CLEANING LIQUID
IS REQUIRED
CHECK
DRAIN BOTTLE
Next, follow the on-screen instructions to carry out the operations.
After cleaning has finished, the sub power switches off.
Start filling ink.
See "First Step Guide" and promptly fill with ink. When filling with ink, you use (two) SOL INK cleaning
cartridges again.
When Dot Drop-out Cannot be Cleared Up
Press [ ] several times until the screen shown on the left
appears.
Press [ ].
Press [ ] twice.
Press [ENTER].
Make sure the cleaning liquid is ready.
Press [ENTER].
Make sure the drain bottle is empty, and then press [EN-
TER].
If it is not empty, redo from Step
Be sure to discard the discharged ink.
.
Chapter 3 Maintenance
67
Advertisement
Table of Contents
