Table of Contents
Advertisement
IMPORTANT
Do not clean the irradiation surface (glass surface) of the UV irradiation device. Doing so may damage
the UV irradiation device. For details on cleaning the irradiation surface of the UV irradiation device,
contact your authorized Roland DG Corp. dealer.
3.
Exit manual cleaning mode.
Close the front cover.
Press [ENTER].
CLEANING...
>>
SETUP MEDIA
4.
Perform a printing test to verify the results of the procedure.
Perform a printing test to check the results.
Perform cleaning using the machine's cleaning functions several times when necessary.
P. 21, "Printing Tests and Normal Cleaning"
The print-head carriage moves to the right side of the machine.
After quitting the manual cleaning mode, the screen returns to the
figure as shown..
Periodic Cleaning Maintenance
Chapter 3 Maintenance
63
Advertisement
Table of Contents
