Table of Contents
Advertisement
Basic Operation
Double-click a print job in the job list.
The "Job Settings" window appears.
The white part in the layout area is the print area that was loaded in STEP
area will not be printed.
Use this screen to fit the print data in the print area and adjust the position of the print data.
Select the "Fit to Media Size" check box
to adjust the print data to match the
print area.
Select the "Center on the Media"
check box to place the print data in
the center of the print area.
* This is an example when "Center on the Media" is selected.
26
Chapter 1 Basic Operation
1.
Print data that is not in the print
Layout area
Advertisement
Table of Contents
