When Moving The Unit; Procedure From Preparing To Move To Reinstallation - Roland VersaUv LEF - 12i Master Manual

When Moving the Unit

Procedure from Preparing to Move to Reinstallation

To move the machine, you must completely drain all ink inside the machine and secure the print heads in
place with packing materials to protect them. Attempting to move the machine without first doing this may
result in damage to internal components due to leaking ink or damage to the heads.
This operation requires six unused SOL INK cleaning cartridges (four for cleaning and two for refilling ink).
Have these on hand before you start.
Important notes on moving
Be sure to use SOL INK cleaning cartridges. Use of any other type may result in breakdown.

Once the preparations for moving are complete, move the machine and fill it with ink with as little delay

as possible. Allowing the machine to stand without ink may damage the print heads.
When moving the machine, keep it at a temperature between 5 to 40˚C (41 to 104˚F) and at relative humidity

between 20 to 80% (with no condensation). Failure to do so may result in breakdown.
Handle the machine with care when moving it, keeping it level (not tilted at an angle) and preventing it

from striking other objects.
Procedure

Clean the print heads.
Perform steps on .

If the drain bottle and the panel cover have been removed, attach them.

Remove the stored retainers.
Chapter 3 Maintenance
75