Obtain Mmsi (Maritime Mobile Service Identity); Automatic Transmitter I Dentification System (Atis); Obtain Mmsi ( Maritime Mobile Service Identity) N Umber O N; Parts Supplied - Raymarine RAY90 Installation & Operating Instruction

2.5 Obtain MMSI ( Maritime
Mobile Service Identity) n umber
Before commencing installation ensure you have
obtained a MMSI n umber f or y our v essel.
A MMSI i s a 9 digit n umber w hich is sent o ver a radio
frequency channel i n order t o identify the originating
vessel/station. If y our v essel a lready has a MMSI n umber
(used for a VHF DSC radio) t hen the same MMSI n umber
must b e used to program your p roduct.
Note:
If a MMSI n umber is not e ntered, t he DSC functionality
of y our r adio will b e disabled.
In the United S tates of A merica, t he MMSI a nd Static
Data must b e entered only by a Raymarine® dealer
or o ther a ppropriately qualified installer o f m arine
communications equipment o n board vessels.
The user i s NOT authorized to do this.
In some areas, a radio operator l icence is required
before a MMSI n umber w ill b e issued. Y ou can request
a MMSI n umber f rom same agency that i ssues radio or
Ship Radio licences in your a rea.
In Europe and other p arts of t he world outside of t he
United States of A merica, t he MMSI a nd Static data can
be set u p by the user.
For f urther d etails, refer t o the relevant
T elecommunications R egulatory Body for y our
area.
Refer t o Appendix C MMSI R egulatory bodies and
application submissions
for a list o f c ontacts for o btaining MMSI n umbers for
some areas.
Warning: MMSI e ntry
You can only enter a MMSI n umber o nce, i f
you enter t he number i ncorrectly or n eed
to change your M MSI n umber, the unit w ill
require re-programming by an authorized
dealer.
16
81377-1-en_US_PRINT.pdf 16
2.6 A utomatic Transmitter
Identification System (ATIS)
Y our p roduct i ncludes ATIS functionality for u se on the
inland waterways of c ontracting governments of t he
"Regional A rrangement o n the Radiocommunication
Service for I nland Waterways"
— also known as
"RAINWAT" .
ATIS adds data at t he end of r adio transmissions that
identifies your s tation. ATIS operation can be turned on
or o ff a s needed via the radio's menu.
An ATIS ID can be obtained from the same agency that
issues radio operator l icenses in your a rea.
Y our A TIS ID should be programed into your p roduct
using the instructions provided.
Note:
Contracting RAINW AT countries include: Austria,
Belgium, B ulgaria, C roatia, t he Czech Republic,
France, G ermany, Hungary, Luxembourg, M oldova,
Montenegro, t he Netherlands, P oland, R omania,
Serbia, t he Slovak Republic and Switzerland.
Note:
When A TIS is enabled, c ertain programing steps
have been implemented to protect t he integrity of
the RAINWAT agreement, i ncluding the blocking of
DSC functions when ATIS is enabled.

2.7 Parts supplied

The following parts are supplied with your p roduct.
Please ensure your b ox contents are correct b efore
proceeding with the installation.
R 1. ay90 / R ay91 V HF DSC Radio (including fitted
power a nd data cable)
2. Raymic handset c radle
3. Raymic handset
4. Raymic handset a daptor c able (12 pin female to 12
pin male with RCA Audio)
5. Passive speaker
6. Passive speaker m ounting gasket
Passive speaker m ounting screws x 4 7.
8. Documentation
9. VHF radio mounting screws x 4
10. Handset c radle mounting screws x 4
11. DeviceNet t o Sea Talkng ® adaptor
12/21/2017 9:05:36 PM